> For the complete documentation index, see [llms.txt](https://docs.yanusstudio.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.yanusstudio.com/yanuslive-pro/function-guide/basic-workflow.md).

# Basic Workflow

This page explains the standard workflow from startup to live tracking, recording, or streaming.

### Workflow

1. Choose a one-to-four-camera layout and select a slot.
2. Set **Source Mode** to **Camera**, select a device, and select **Connect**.
3. Confirm orientation and tracking. Run QuickN or ROM when required.
4. In **LIVE** mode, press `Space` to start and stop the take.
5. Load the take in Session Browser and press `Q` for **EDIT** review.
6. Enable LiveLink or OSC when an external destination is required.

### Recommended first test

* Confirm **Connected** and **Ready to record**.
* Confirm the face is upright and tracking responds as expected.
* Do not record if a required slot is **Degraded**.