📷Camera Settings

Camera Settings control how YanusLIVE Pro detects, opens, and processes camera inputs.

These settings matter for stable real-time tracking.

Camera source setup

1. Select the camera slot and set Source Mode to Camera.

2. Select a device, then select Connect.

3. Set Rotation and the matching Camera Profile.

4. Confirm Connected before tracking or recording.

One physical device can belong to only one camera slot.

Profiles and formats

Use Existing Default Camera for the default path. Use a Headcam profile for Rokoko, BUNSHIN, or generic UVC hardware.

For Headcam profiles, start with 1280x960 @ 60fps MJPG (Recommended).

Available Headcam backends are Auto, Media Foundation, and DirectShow. Available formats are Auto, MJPG, and YUY2.

For BUNSHIN SDI (DeckLink), the incoming SDI source determines resolution and frame rate.

Rotation and hardware

Set None (0 deg) for normal landscape orientation. Use 90 deg CW, 90 deg CCW, or 180 deg when required.

Select Configure Device... only while the camera is connected.