📷Camera Source Panel

The Camera Source Panel configures one camera slot at a time.

Each physical device can belong to only one slot.

Connect a live camera

1. Select a camera slot and set Source Mode to Camera.

2. Select a physical device and select Connect.

3. Wait for Connected status.

4. Set Rotation when the head-mounted view is not upright.

5. Choose the matching Camera Profile.

For Headcam profiles, start with 1280x960 @ 60fps MJPG (Recommended).

Use Configure Device... only for connected-camera hardware properties.

Profiles and source modes

Use Camera for live capture. Use File for stored video.

Supported profiles include Existing Default Camera, Rokoko Headcam, BUNSHIN Headcam, Generic UVC Headcam, and BUNSHIN SDI (DeckLink).

For BUNSHIN SDI, resolution and frame rate follow the incoming signal.

Connection states

• Connected — The slot is ready for tracking and recording.

• Connecting... or Reconnecting... — Wait for the connection to complete.

• Degraded — Stabilize the connection before recording.

• Device not found or Disconnected — Refresh devices, reselect the device, and reconnect.

Calibration

Use QuickN to capture a neutral expression. Use ROM for full range-of-motion calibration.

Use FixONE to recalibrate one expression after QuickN or ROM establishes a neutral.