Integration of HyperDeck and YanusLIVE

<HyperDeck Studio Mini by Black Magic Design>

Black Magic Design Website

(https://www.blackmagicdesign.com/products/hyperdeckstudio/techspecs/W-HYD-11)

1. Connecting the PC and HyperDeck To connect the HyperDeck to a PC, you need to connect the Ethernet, USB-C, and SDI IN ports on the HyperDeck. The Ethernet can be connected directly to the PC, but a static IP must be used. Connect the USB-C (EXT DISK) port to the PC. The PC's USB port can be either USB-A or USB-C.

<Connecting HyperDeck to the PC>

For the SDI-IN connection, use Acsoon's Rx device and the provided SDI cable. It is recommended to use the provided cable, as using an incorrect cable may result in improper video input.

1. Network Setting After completing the network connection, you need to configure the IP settings for both the HyperDeck and the PC. Set the IP on the HyperDeck to Static IP and assign the desired IP.

< Static IP >

< IP Input >

1. YanusLIVE Settings Once the IP on the HyperDeck is set to static, you must also enter the same IP into the Settings of YanusLIVE.

< YanusLIVE IP Setting >